Jackson Dishwasher AJ-44 User Manual download pdf (Page 3)

a 7/16” combination wrench or 7/16” nutdriver will be required in

order to hold the bolt head inside the control box.

Remove the locknuts from the opposite bolts used to hold down the

control box (do not remove the bolts) and secure the bracket to

underside of the hood. The folded part of the bracket should be fac-

ing the rear of the machine. Immediately tighten down the locknuts.

5. Remove the splash shield, which is bolted to the underside of

the hood next to the wash manifold and turn it 180B.

6. Remove the pawl bar and set to the side.

7. Remove the lower wash arm assembly by turning the locking

screw to unlatch it. The entire assembly should then lift out.

8. Remove the lower wash arm support bracket. Place it to the side

with its locknuts.

www.jacksonmsc.com

AJ-44 Conveyor Direction Change Instructions

Revision A (03/30/2005)

Removing bracket (bottom view)

Removing bracket (control box view)

Removing and turning splash shield

Remove the pawl bar by grapsing firmly and

lifting up.

Locking screw

Removing the locknuts for the lower wash arm

support bracket.

1 2 3 4 5 6 7 8

No comments

Jackson Dishwasher AJ-44 User Manual Page 3